Chat with us, powered by LiveChat

Always low prices and perfect quality

Cart 0

Cart

Cart 0

Cart

ij.start.canon ts9120

Enter Printer Model

Canon Pixma TS9120 is the ultimate premium quality All-In-One that allows for Setup through WiFi, Bluetooth, and Ethernet. Therefore, ij.start.canon ts9120 is now even more convenient. Canon Pixma TS9120 allows for both Wireless and Wired Setup.

Canon Pixma ts9120 Wireless Setup

ij.start.canon ts9120 process involves two major parts. First, connect the printer to your home network. Thereafter, download the drivers on your computer and set it up to command the printer.

Establish The Wireless Connection
  1. Plug in the printer to a power source and turn it On. You must confirm that the power lamp is lit. Wait in case if the printer is performing any process like cleaning, print head alignment etc.
  2. You can find a Menu tab on the left side of the printer’s display screen. It will be marked with a Home icon.
  3. You must press this Menu tab. If it brings an error screen, tab OK and press the Menu button again.
  4. The following screen will have a Wireless Connection tab on the bottom left corner. Click it to open the Wireless settings screen.
  5. Click the LAN Settings tab from the various available options.
  6. Select the Wireless LAN tab on the next screen.
  7. On the subsequent screen, opt for the Wireless LAN Setup.
  8. Select Easy Wireless Connect under the Wireless LAN Setup.
  9. Canon Pixma TS9120 Printer allows for Easy Wireless Connect.  It may take some time and your internet connection will be temporarily unavailable.
  10. Next screen will confirm that settings will be made on a computer or smartphone. You need to tab on the “Yes” option to confirm it.
  11. It may take several minutes now to complete the configuration. Once the printer preparation is complete, you will be taken to the next screen that asks you to proceed with the ij.start.canon ts9120 on your computer, smartphone etc. Return back to the application screen.
Establish The Wired Connection
  1. Plug in the printer to a power source and turn it On. You must confirm that the power lamp is lit. Wait in case if the printer is performing any process like cleaning, print head alignment, etc.
  2. You will need an Ethernet cable to configure the printer.  It is usually not included in your Canon Printer package. Hence, you must procure it beforehand.
  3. You must locate the Ethernet port on the left side at the back of your printer. Remove the cap on the port.
  4. You should connect the Printer and the Network Device i.e. Router via the Ethernet cable. You must ensure that the Ethernet cable is plugged into right port on the printer and router for ij.start.canon ts9120
  5. Your printer’s display screen will now show a Menu tab on the left side. It will be marked with a Home icon. Press this Menu tab.
  6. The following screen will have a Wireless Connection tab on the bottom left corner. Click it to open the Wireless settings screen.
  7. Next screen will host the various available options. Choose the LAN Settings tab.
  8. Next, opt for the Wired LAN option.
  9. Now tab on the Wired LAN Active/ Inactive button.
  10. Choose the status as “Active” by clicking the tab.
  11. Click on the Menu tab located on the left side of the screen. Wait for the configuration to complete. You will be able to find the Ethernet icon on the bottom left corner of the display screen. It will appear after the connection is complete.

Choose Your Model

Canon Pixma TS9120 Download
  1. Open the internet browser and type in http://canon.com/ijsetup.com/.Click “Go” to open the webpage.
  2. You will be redirected to the Canon website for Printer Setup. Click on the Setup link.
  3. You must follow all the onscreen instructions and prompts carefully.
  4. Now the Product Selection screen will open. You must type in Canon Pixma TS9120 Printer as the product and Click Go.
  5. Specify Your Region correctly when prompted to Select Your Region.
  6. Now you will have access to the download link. Click the Download tab. The setup file will start downloading on your computer.
  7. It may or may not prompt you to choose the Save location for the downloaded file. You should do the needful as requested.
  8. It might take several minutes to complete the download. Wait patiently for the same.
  9. Click Run on the downloaded file.
Install Canon Pixma TS9120 For Windows
  1. Open the Downloaded file on your computer.
  2. A small Setup window will appear.  Click on the Start Setup tab.
  3. Next screen will prompt you to select your region. Specify the appropriate Region and click Next.
  4. You will now be presented with the Software License Agreement. Scroll it down and Select Yes.
  5. A subsequent window will seek your permission to participate in the Extended Survey Program. Read all the details. You may decide to Agree or Do Not Agree. Click the option as per your decision.
  6. Now you will be taken to the Firewall Setting window. You must mark the box that says Deactivate the Block. Click Next.
  7. Next window will display the chosen Connection method. You must verify that the printer and router details are correct. Click Yes to proceed if the details are correct.
  8. This will begin the Setup for your printer. Depending upon the router and its network settings, you might be prompted for certain details. “Select Wireless Router” window may pop up. Here, select the correct router and enter the network key or the password and click Next.
  9. Next screen will display the Setup status as processing. You must wait for the process to complete.
  10. Once it is done, you will be notified on the following window. Click Next on the Network Connection Completed window.
  11. You will now be redirected to the Test Print screen. Run the test by following onscreen instructions. You may note that your printer must be loaded with plain paper in order to run the test.
  12. Click Next on the Setup Complete window.
  13. Next window will ask your permission to install any additional software. Make the appropriate choice and click Next.
  14. Click Next again on the following window.
  15. You will now be taken to the user registration window. You can either click Skip to override this processor Click Next for User Registration. If you want to register yourself as a user, follow instructions for the same.
  16. Final screen declaring Completion of the Installation appears. Click Exit to leave the Installer.
  17. Henceforth, the ij.start.canon ts9120 is finished.

The Process

STEP 1
issue
Tell Us Your Issue
STEP 2
diagnos
Proper Diagnosis
STEP 3
instant solution
Instant Solution
STEP 4
tips
Tips For Your Printer
Install Canon Pixma TS9120 For Mac
  1. Open the Downloaded file on your computer.
  2. A small Setup window will appear. Click Next on this very first screen.
  3. You will provide your computer’s username and password when prompted. Type in the details and select the Install Helper tab.
  4. Click the Start Setup tab on the Setup window.
  5. Now, you will prompt to select your region. You must select the correct option and click Next.
  6. Software License Agreement window will appear now. Scroll it down and Select Yes.
  7. Following window will be the Extended Survey Program. You can choose to Agree or Do Not Agree after going through the same. Click the option as per your decision to proceed.
  8. Your Mac will check the status of your printer which might take a few moments. Wait for it.
  9. A subsequent window will show the Connection method. Verify if the printer and router details are correct. Click Yes if the details are correct.
  10. This will begin the Setup for your printer. Based on the router and its settings, you might be required to follow an additional step. “Select Wireless Router” window may pop up. Here, you must select the correct router and enter the password and click Next.
  11. You will be notified on the following window about the completion of the connection. Click Next on the Network Connection Completed window.
  12. The Drivers will start Installing as displayed on the next screen. Wait for it.
  13. You may get a pop up seeking access to the Network. Click Allow for smooth Installation.
  14. After the successful completion of the Installation, you will get the option to add Printer. Click the Add Printer tab here.
  15. The Add screen will have a list of available printers in the drop-down menu. Select the TS series with Bonjour Multifunction under the Kind column. You must select AirPrint or Secure AirPrint from the Use list.
  16. After making appropriate printer choice, click Add.
  17. Click Next on the Add Printer screen.
  18. You will now reach the Test Print screen. Run the test by following onscreen instructions. Ensure that the printer must be loaded with plain paper in order to run the test.
  19. Click Next on the Setup Complete window.
  20. Next window will ask your permission to install any additional software. Make the appropriate choice and click Next.
  21. Click Next again on the following window.
  22. Click Next or Skip on the User Registration window. You may choose to register yourself as a User or skip the process for now. If you want to register yourself as a user, follow instructions for the same.
  23. Click Exit to leave the Installer.
  24. Henceforth, the ij.start.canon ts9120 is finished.
logo

As a self-ruling organization provider we help game-plans identified with Canon Printers.The copyright ensured information is only just for data designs.We don’t furnish any affirmation for any associations or items.Prior to utilizing this site,read through the terms and conditions and insurance procedure and totally submit to them.

Get In Touch

Phone:

+1-844-673-7300(US/CA)

020 8123 1772 (UK)

+61 2 8005 8013 (AUS)

0800-183-3720 (Germany)

+64 09 889 4443 (NZ)